一类(0,1)-矩阵的最大积和式的积分表达式

给出了线和n-2的n阶（0，1）－矩阵的最大积和式的积分表达式，并证明了该积分表达式与[1]得到的组合表达式等价。     

A simple solution of the van der Waerden permanent problem

The van der Waerden permanent problem was solved using mainly algebraic methods. A much simpler analytic proof is given using a new concept in optimization theory which may be of importance in the general theory of mathematical programming.     

磁学研究与三环公司发展

简要回顾了20世纪20年代以来我国现代磁学研究的历史。20世纪80年代初期正值我国改革开放浪潮之时，科技人员纷纷走上科技成果产业化道路。建立于1985年的中国科学院三环公司就是一个成功的代表，同时好也是我国现代磁学研究结出的一颗硕果。     

Metallurgical factors determining the coercivity of ND-FE-B magnets

In Nd-Fe-B based permanent magnets a high magnetocrystalline anisotropy of the hardmagnetic phase is necessary for a high intrinsic coercivity. In fact, metallurgical parameters (distribution of phases, chemical composition and crystal structures of phases) and processing parameters (alloy preparation, size and shape of particles, sintering and annealing treatments) determine the value of the coercive force of each sintered Nd-Fe-B magnet. Our analytical electron microscope study shows that melt-spun and sintered Nd-Fe-B based magnets contain more or less a distribution of nucleation centres for reversed domains, such as iron-rich phases and-iron precipitates within the hardrnagnetic 2141-grains. A continuous non-magnetic layer phase between the hardrnagnetic 2141-grains increases the expansion field of reversed domains and increase the coercivity. In melt-spun magnets the contribution of the pinning of magnetic domain walls becomes effective during the magnetization reversal process.     

Computing the Kekulé structure count for alternant hydrocarbons

A fast computer algorithm brings computation of the permanents of sparse matrices, specifically, molecular adjacency matrices. Examples and results are presented, along with a discussion of the relationship of the permanent to the Kekulé structure count. A simple method is presented for determining the Kekulé structure count of alternant hydrocarbons. For these hydrocarbons, the square of the Kekulé structure count is equal to the permanent of the adjacency matrix. In addition, for alternant structures the adjacency matrix for N atoms can be written in such a way that only an N/2 × N/2 matrix need be evaluated. The Kekulé structure count correlates with topological indices. The inclusion of the number of cycles improves the fit. When comparing with previous results, the variance decreases 74%. The calculated standard heat of formation correlates with the logarithm of the Kekulé structure count. This heat increments 349 kJ/mol each time the Kekulé structure count increases by one order of magnitude. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Permanent antimicrobial silicone rubber based on bonding guanidine polymers

Recently, silicone rubber (VMQ) was extensively used in household articles and medical devices. To develop a kind of safe and long‐term antimicrobial VMQ was of great significance. In this work, a kind of vinyl‐contained polyhexamethylene guanidine hydrochloride (VPHMG) was synthesized and used as antimicrobial additive for VMQ. With the increasing of VPHMG addition, the mechanical properties and antimicrobial properties of VMQ‐VPHMG were significantly improved. In particular, the antimicrobial rates against Escherichia coli and Staphylococcus aureus were higher than 99.99% as for 4 wt% of VPHMG addition. Moreover, the surface concentration of VPHMG as well as the antimicrobial rates revealed almost unchanged after being extracted by water and methanol. All the results indicated the vinyl‐contained VPHMG vulcanization and therefore provided the permanent antimicrobial performance for VMQ.     

One-pot Synthesis of a Truncated Cone-shaped Porphyrin Macrocycle and Its Self-assembly into Permanent Porous Material

Here, we report the synthesis of a truncated cone-shaped triangular porphyrinic macrocycle, P₃L₃ , via a single step imine condensation of a cis-diaminophenylporphyrin and a bent dialdehyde-based linker as building units. X-ray diffraction analysis reveals that the truncated cone-shaped P₃L₃ molecules are stacked on top of each other by π⋯π and CH⋯π interactions, to form 1.7 nm wide hollow columns in the solid state. The formation of the triangular macrocycle is corroborated by quantum chemical calculations. The permanent porosity of the P₃L₃ crystals is demonstrated by several gas sorption experiments and powder X-ray diffraction analysis.